Busbar :
A „busbar“ is any part of the network, which can be separated by breakers etc. An unique Busbar No. must be assigned to any of these parts. These numbers are important for defining the connections of the breakers, as shown:

Any network part enclosed by breakers gets a number between 0 and 250, here 1-3 and 69-72 are used. Every breaker gets an (normally unique) combination of „up“ and „down“ parameters (Par 161). The breakers position in the network is fully described by these parameters.
Remark: It seems to make no difference for tiebreakers, if „up“ and „down“ values are exchanged. As a simple rule: Power should be indicated positive, when power is transferred from „up“ to „down“!